Gas Heating Deviceのメーカーや取扱い企業、製品情報、参考価格、ランキングをまとめています。
イプロスは、 製造業 ・ BtoB における情報を集めた国内最大級の技術データベースサイトです。

Gas Heating Device - メーカー・企業と製品の一覧

Gas Heating Deviceの製品一覧

1～6 件を表示 ／ 全 6 件

表示件数
Inline electric heater without insulation material, gas heater "Clean Hot"

Inline electric heater without insulation material, gas heater "Clean Hot"

A heater that achieves high efficiency and clean heating without the need for insulation! The gas heater "Clean Hot" is an electric heater that utilizes bending technology!

The gas heater "Clean Hot" achieves a reduction in the surface temperature of the outer pipe without the use of insulation materials, thanks to its special internal structure. It can be used in environments such as clean rooms since insulation materials are not required. You can choose from six different models according to the heater capacity (W). It supports gas heating from 50 to 1000 NL/min (refer to each model). In manufacturing settings, it can be used for a variety of applications such as: - High-temperature heating of inert gases like air and nitrogen gas - Removal of moisture after wet cleaning - Inert gas heating in the thermal processing of semiconductor and LCD panel substrates This compact and low-cost electric heater is versatile and suitable for a wide range of uses. 【Features】 - High heating efficiency due to the use of special heaters and structures - Quickly heats the target gas cleanly and allows for precise temperature control - The outlet gas temperature can be set up to a maximum of 500°C (varies depending on usage conditions) *For more details, please download the materials or feel free to contact us.

  • Img1234.jpg
  • Img0074.jpg
  • _DSC6647.jpg
  • Img0082.jpg
  • Img0069.jpg
  • Img0004.jpg
  • _DSC6649.jpg
  • Other semiconductor manufacturing equipment
  • Heating device

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Active in heating tests of small amounts of gas! 'Small Flow Gas Heater'

Active in heating tests of small amounts of gas! 'Small Flow Gas Heater'

New thermal industrial electric heater "Low Flow Gas Heater" by Shin Netsu Kogyo enables heating of gases with low flow rates.

This is an electric heater that enables gas heating at an extremely low flow rate (around 10 L/min), which is difficult to achieve with conventional heaters. It is a heater realized through our company's seed heater manufacturing technology, and it is very compact and can be directly connected to piping. Additionally, the gas contact part is made of stainless steel, allowing for clean gas heating. 【Features】 - Capable of heating gas at low flow rates (around 10 L/min). - Capable of temperature increases from room temperature to about 350°C. - Available in two types: VCR fitting specification and pipe end specification. For more details, please refer to the PDF document or feel free to contact us.

  • _DSC6634.jpg
  • _DSC6689.jpg
  • Img1212.jpg
  • Img1213.jpg
  • Heating device
  • Other heaters

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Custom specification gas heater "Clean Hot" CLH-1.5

Custom specification gas heater "Clean Hot" CLH-1.5

Custom specifications of the "Clean Hot" series gas heater from Shin-Net Industrial. Now compatible with 40L/min and an outlet temperature of 400℃, which was not supported in the standard specifications!

Introducing the custom specifications of the gas heater "Clean Hot" (CLH series). The custom specification CLH-1.5 is a gas heater that supports an outlet temperature of 400°C at a flow rate of 40L/min, which could not be covered by the standard specifications of Clean Hot. While it looks similar to the standard specifications CLH-0.6 and CLH-0.9, the internal structure has been modified to achieve an outlet temperature of 400°C. For information on the flow rates and outlet temperature ranges that can be accommodated, please check our website → Product Information → Clean Hot page. https://www.shinnetsu.co.jp/products/product02/

  • _DSC9086.jpg
  • _DSC9087.jpg
  • Heating device

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Case Study] Triple-Wrapped Clean Hot

[Case Study] Triple-Wrapped Clean Hot

How to create flow paths and bend heaters are key points! Introducing case studies for solutions.

Here is a case study solved by Shin-Net Industrial. We received a request to use our "Clean Hot" product, but due to limited installation space, the customer wanted a product that could be half the length, even if the diameter was larger. Simply increasing the bending diameter of the heater would reduce the flow rate and pose a risk of overheating, so it was necessary to devise a solution for the gas flow. Based on the data from when we developed the same product, we worked on increasing the gas flow radially and creating a heater with equivalent performance. [Case Study <Solution>] - Based on the data from when we developed Clean Hot, we increased the gas flow radially and worked on creating a heater with equivalent performance. - The dimensions of the gas flow path were determined to ensure the flow rate remained the same. *For more details, please refer to the PDF document or feel free to contact us.

  • Heating device
  • Other heaters

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Case Study] Small Flow Gas Heater

[Case Study] Small Flow Gas Heater

Increase the flow speed and enlarge the contact area of the heater! Introducing a case study for resolution.

Here is a case study solved by Shin-Net Industrial. We received a request to raise a small gas flow of 0.1L/min to 10L/min up to 350℃. The standard products we offer are designed for several hundred L/min, so they are too small for the required flow rate. Unlike water, gas does not transfer heat easily, so we thought the key was to increase the flow velocity and enlarge the heater's contact area. Therefore, we ensured sufficient flow velocity by narrowing the gas flow pipe. We selected our 1.8 ultra-thin heater and tightly wound it around the gas flow pipe to secure the contact area. [Case Study <Solution>] - Increase flow velocity and enlarge the heater's contact area - Ensure sufficient flow velocity by narrowing the gas flow pipe - Select the 1.8 ultra-thin heater and tightly wind it around the gas flow pipe to secure the contact area *For more details, please refer to the PDF document or feel free to contact us.

  • Heating device
  • Other heaters

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
High flow gas heater compatible with over 1000 NL/min

High flow gas heater compatible with over 1000 NL/min

Inline electric heater "High Flow Gas Heater" that can be directly connected to piping.

Compared to a typical shell-type heater (which has linear sheath heaters arranged inside the container), the length is reduced to about half. Our technology for bending sheath heaters in complex shapes has achieved compactness. It is an inline type that can be directly connected to existing piping. Additionally, the gas connection part is made of stainless steel, allowing for clean gas heating.

  • 08.jpg
  • 19B.jpg
  • Heating device
  • Other heaters

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Gas Heating Deviceの関連カテゴリ

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.